Skip to content
stratum+tcp://stratum.testnet5.com:3333· user: your tb1 address · pass: xSetup guide →
Testnet5.com
Testnet5.com › Start mining

Start mining Testnet5: pool setup guide

No sign-up and no account. Point any SHA-256 miner at the pool, use your Testnet5 receiving address as the username, and you are mining.

Pool settings

SettingValue
Pool URLstratum+tcp://stratum.testnet5.com:3333
Hoststratum.testnet5.com
Port3333 for small miners (starting difficulty 4,096), or 3334 for ASICs and rentals (starting difficulty 262,144)
Username (worker)Your tb1 address. Add .rig1 to name a worker, like tb1q...xyz.rig1.
Passwordx
AlgorithmSHA-256 (same as Bitcoin)
Fee10% of each block reward
PayoutsPROP: you are paid for the shares you submitted toward each block the pool finds. Payouts are sent automatically every 10 minutes once your balance reaches the minimum payout of 0.01 tBTC.

Which port?

PortStarting difficultyBest for
33334,096Small miners, such as a Bitaxe or other low-hashrate devices
3334262,144ASICs and rented hashpower, such as MiningRigRentals
New to mining?

Ask Grok to walk you through setup step by step, from getting a tb1 address to pointing your miner at the pool.

Get help starting to mine with Grok

1. Get a Testnet5 address

Testnet5 uses the same tb1 address format as Testnet3, Testnet4 and Signet [BIP 95]. The launch notes suggest the easiest route: create a Testnet3, Testnet4 or Signet wallet and reuse one of its addresses, then later spend with a Testnet5 client [bootstrap notes]. If you run your own Testnet5 node, use bitcoin-cli -testnet5 getnewaddress instead (see Run a node).

Use an address you control. Payouts go only to the address in your username, and they cannot be redirected later.

2. Point your miner at the pool

Testnet5's minimum difficulty is about 1,000,000, which the launch notes describe as six orders of magnitude higher than Testnet4's minimum, so you need an ASIC [bootstrap notes] [BIP 95]. CPU and GPU mining is not practical.

  1. Open your miner's pool settings page (Bitaxe, Antminer, Whatsminer and most others have one).
  2. Enter the pool URL stratum+tcp://stratum.testnet5.com:3333, or use port 3334 instead of 3333 if your miner is a full-size ASIC.
  3. Enter your tb1 address as the username, optionally followed by .workername.
  4. Enter x as the password.
  5. Save and restart the miner. Your stats appear on the miner lookup page within a few minutes.

3. Or rent hashpower on MiningRigRentals

If you do not own an ASIC, you can rent SHA-256 hashpower and point it at this pool. MiningRigRentals connects to pools with plain stratum+tcp, which is what we use.

  1. Create an account at miningrigrentals.com and fund it. Rentals are paid in real bitcoin or other real coins.
  2. Go to your pool profiles and create a new profile for the SHA-256 algorithm.
  3. Add a pool to the profile with host stratum.testnet5.com, port 3334, your tb1 address as the worker name, and x as the password.
  4. Add a second pool as a backup in the same profile, in case ours is unreachable.
  5. Browse the SHA-256 rigs, choose one, and pick your profile when you rent it.
  6. Watch your hashrate on the miner lookup page.

Renting hashpower costs real money, and Testnet5 coins are test coins. Only rent what you are comfortable spending on testing.

New to mining?

Ask Grok to walk you through setup step by step, from getting a tb1 address to pointing your miner at the pool.

Get help starting to mine with Grok

4. Check your stats

Mined some test coins? See the testnet markets on AltQuick.

AltQuick lists Bitcoin Testnet4 (TBTC4) and Bitcoin Signet (SBTC).

Open AltQuick